Frequently Asked Questions

Find answers to common questions about our handmade bathroom furniture, including materials, care, customisation, fittings and delivery.

If you need help choosing the right specification for your bathroom, please get in touch before ordering.

Materials & care

What do you use to finish the wood?

We finish our oak furniture with Osmo Polyx Oil, applying two coats to the furniture and three coats to solid oak worktops.

This protects the wood while retaining its natural character. The finish provides water resistance, but standing water and spills should still be wiped away promptly.

Some older Furnewal units were finished with lacquer. If you’re unsure which finish your furniture has, contact us with your order details before applying any maintenance oil or treatment.

How do I clean and care for the wood?

For everyday cleaning, use a soft, well-wrung-out damp cloth, then wipe dry. For furniture finished with Osmo Polyx Oil, we recommend Osmo Spray Cleaner, following the instructions on the bottle.

Wipe away splashes and spills promptly, including water around the basin and taps. Avoid leaving wet toiletries, cloths or bathmats resting on wooden surfaces.

Do not use abrasive pads, bleach, limescale removers or harsh bathroom cleaners on the wood. Keep your bathroom well ventilated to help control moisture.

If the finish becomes worn, dull or marked, contact us for advice before sanding or applying a treatment, particularly if your furniture has a coloured finish or was originally lacquered.

For further cleaning and maintenance advice, download our Care Guide.

Is wooden furniture suitable for a bathroom?

Yes—properly finished and cared-for wood furniture is suitable for bathroom use.

Our protective finish helps resist everyday splashes, but the furniture should not be left wet or exposed to persistent damp. Wipe away standing water promptly and keep the bathroom well ventilated.

Your installer should seal around the basin and fittings where required by their installation instructions, helping prevent water from reaching exposed edges or collecting beneath fittings.

Are pale lines or silvery markings normal in oak?

Yes—oak can display pale lines, silvery flecks or ribbon-like patterns called medullary rays. These are part of the wood’s natural structure and are often particularly visible in quarter-sawn boards.

Their appearance varies between boards and adds to the individual character of each piece. Medullary rays themselves are not damage or a fault in the finish.

If you’re unsure whether a mark is natural figuring or something that needs attention, send us a photograph and we’ll be happy to advise.

Does your furniture come with a guarantee?

Our furniture comes with a 10-Year Guarantee, subject to the conditions and exclusions explained on our guarantee page.

Separately supplied basins, taps, wastes and other accessories are outside the furniture guarantee and may have their own manufacturer’s cover.

Please see our 10-Year Guarantee page for full details.

Sizes & customisation

How are the unit dimensions measured?

For units supplied with a worktop, the stated width and depth refer to the overall worktop dimensions. The worktop normally overhangs the cabinet by 10mm at each side and at the front.

The height is measured from the floor to the top of the worktop. A countertop basin adds to the overall height.

Please check the dimensions and specification of your chosen unit carefully. If you’re ordering without a worktop or fitting the furniture into a restricted space, contact us before ordering so we can confirm the measurements you need.

Can you change a unit’s width, depth or height?

Yes—we can often adapt the dimensions of our furniture to suit your bathroom.

Choose from the sizes available on the product page, or contact us before ordering if you need a different width, depth or height.

Please include your preferred design, required dimensions and any basin, tap or plumbing requirements. We’ll confirm what is possible, along with any additional cost and effect on the estimated lead time.

Any bespoke dimensions must be agreed with us in writing before manufacture.

Can I choose different handles or supply my own?

You can choose from the handle options shown in the product configuration menu.

If you’d prefer to supply your own handles, please contact us before ordering so we can check their suitability and fixing requirements. We can arrange for you to send them to our workshop for fitting; an additional fitting charge applies.

Please agree the arrangements with us before sending any handles, as we’ll need them in time for production.

Can I choose the internal drawer finish?

Where available, you can choose your internal drawer finish in the product configuration menu.

Unpainted drawer interiors are protected with an oil finish to complement your chosen external wood finish. Painted interiors are available in the colours listed for your selected unit.

If you’d like a colour that isn’t shown, please contact us before ordering. We’ll confirm whether we can offer it and explain any additional cost.

Can you convert a piece of furniture I already own?

Unfortunately, we don’t offer a conversion service for customers’ existing furniture.

We make our own bathroom furniture to order. If you’re looking for a particular style or size, please contact us to discuss whether one of our designs could be adapted to suit.

Basins, taps & worktops

What quartz do you use?

We use 20mm-thick quartz worktops in the colours and finishes shown on each product page.

Quartz patterns and veining can vary, so your worktop may differ from the example photographs.

Our supplier may occasionally change the quartz brand used for a particular finish. If this affects your order, we’ll discuss any proposed alternative with you before proceeding.

If you need to match existing surfaces or require a particular quartz brand, please contact us before ordering.

What type of basin can I use?

Many of our units suit a countertop basin, with compatible options shown in the product configuration menu. Undermount basins are also available on selected units.

If you’re supplying your own countertop basin, a flat base usually provides the simplest installation. Some basins have an underside projection or overflow channel that requires a larger or specially shaped worktop cut-out.

Please send us the manufacturer’s technical drawing before ordering so we can check the dimensions, cut-out requirements and space needed for your chosen taps. Any additional machining and cost must be agreed in advance.

Can I have an undermount basin?

Yes—undermount basins are available on selected units, with compatible options and prices shown in the product configuration menu.

For an undermount basin with wall-mounted taps, the unit depth increases to 500mm. With worktop-mounted taps, it increases to 550mm to provide space behind the basin.

We need to supply the undermount basin so we can coordinate the worktop cut-out and fitting.

If the option isn’t shown for your chosen unit, please contact us before ordering to discuss whether an adaptation is possible.

What type of tap should I choose?

For a countertop basin, choose a tall basin mixer with enough height and spout reach to clear the basin rim and direct water into the bowl. Wall-mounted taps can also be suitable.

For an undermount basin, you can choose compatible worktop-mounted or wall-mounted taps. Basins with their own tap ledge require taps suited to the holes and layout provided.

The product configuration menu shows the options available for your chosen unit. If you’re supplying your own taps, please send us the manufacturer’s technical drawing before ordering so we can check the required space and hole sizes.

Will you make the holes for the basin waste and taps?

Yes—we prepare the required holes or cut-outs in quartz and wooden worktops according to the basin, tap positions and specifications agreed for your order.

If you’re supplying your own basin or taps, please provide the manufacturer’s technical drawings, including the required hole or cut-out sizes. A product photograph or sales link alone may not contain enough information.

We may need further measurements, a template or the physical fitting before machining can proceed. Any non-standard work and additional cost will be agreed with you in advance.

Drawers & plumbing

How are the drawers adapted for pipework?

Where required, the top drawer has a U-shaped cut-out to accommodate the basin waste and trap. Lower drawers generally have a 60mm service space behind them for pipework.

The layout and available clearance depend on your chosen unit and basin configuration.

If you have existing plumbing or specific clearance requirements, please send us measurements before ordering so we can check whether an adaptation is needed.

Can my pipework go into the floor or the wall?

Our units can generally accommodate pipework running into either the floor or the wall. Space behind the drawers allows pipes to run downwards, while an opening in the back panel provides access for wall connections.

Your installer should check the pipe route, waste and trap position against the layout of your chosen unit before installation.

If your existing connections may conflict with drawers, shelves or structural parts, contact us before ordering so we can discuss any adaptations required.

For guidance before fitting, download our Installation Guide and share it with your installer.

Ordering, lead times & delivery

How long will my order take?

Our furniture is handmade to order in our Sussex workshop. We cut, prepare, build and finish each piece ourselves, so please allow time for production.

Current estimated lead times are shown on our website and product pages, or confirmed in your quotation. Unless stated otherwise, these refer to dispatch from our workshop; please allow additional time for delivery.

If you need your furniture by a particular date, contact us before ordering so we can discuss whether we can meet it. Any specific deadline must be expressly agreed with us.

Can I change my delivery address?

Yes—please contact us as soon as possible, before dispatch, with your order number and the full new delivery address.

A change of destination may affect the delivery charge, service available or timing, particularly for islands, the Scottish Highlands and remote areas. We’ll confirm any revised arrangements and additional charge before proceeding.

Once your order has been dispatched, an address change may not be possible or may incur a courier charge.

Can you store my furniture until I’m ready for delivery?

We have limited storage space at our workshop, so we normally need to dispatch furniture once production is complete.

If you won’t be ready to receive your order within the estimated lead time, please contact us before ordering so we can discuss suitable timing.

Please don’t assume we can hold a completed unit unless this has been agreed with us in advance.

Can I choose my delivery day?

In most cases, you can arrange a suitable delivery day with the courier. Available days depend on your postcode and the courier’s routes, with fewer options in some rural and remote areas.

The courier will confirm the arrangements and provide an estimated delivery window before your delivery.

If you need a particular day, please contact us before ordering so we can check what may be possible. A requested date is only confirmed once it has been agreed.

Can I book my installer before delivery?

We strongly recommend waiting until your furniture and any separately supplied basins, taps or worktops have arrived and been checked before booking your installer.

Production and delivery estimates can change. Waiting until everything is with you helps avoid unnecessary installation costs or rearrangements.

If anything appears damaged, incorrect or missing, please contact us before installation so we can help resolve it.

Do you offer a discount for ordering multiple units?

We price our handmade furniture as competitively as we can, so we don’t generally offer discounts for ordering multiple units.

We offer a 10% trade discount to approved business customers. To apply, complete our Trade Account application form with your business details.

Once approved, your discount applies automatically at checkout when you use your approved email address. It cannot be combined with other discounts.

Will the delivery team carry my furniture upstairs?

Our standard furniture delivery is a two-person service to a ground-floor location.

First-floor delivery may be possible, but is always at the delivery team’s discretion and depends on safe, practical access. It cannot be guaranteed.

For delivery above the first floor, please contact us before ordering so we can check availability and any additional charge. Tell us about steps, narrow entrances or other access restrictions in advance.

Please see our Delivery & Shipping policy for full details, including services to islands and overseas destinations.

Can I visit your workshop before ordering?

Yes—workshop visits are welcome by appointment at our workshop in Cowfold, West Sussex.

We don’t have a showroom, and the furniture available to view depends on what we’re currently making. If you’re interested in a particular design or finish, please mention this when arranging your visit.

Please book through our Contact page before travelling.

Can I change or cancel my order?

Please contact us as soon as possible if you need to change or cancel your order.

Changes must be agreed with us and may affect the price or estimated dispatch date. Some changes may no longer be possible once materials have been ordered or work has begun.

Please see our Returns & Cancellations policy for the cancellation arrangements and rights applicable to your order.

Still have a question?

If you haven’t found the answer you need, please get in touch. We’re happy to help with choosing a design, checking dimensions or discussing your bathroom requirements.